Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Features Added:

• Frame Guides are now displayed during playback
• Camera Tools are now added to the toolbar when enabled via a monitor function button
• The Horizon Tool now uses the camera’s gyroscope data
• Added support for the Extended Highlights function button.

Bugs Fixed:

• Fixed Custom values not being properly added to the selection list
• Fixed “TC” icon’s state not updating
• Re-added auto-rotate options
• Fixed IP settings element display bug
• Resolved an issue with Image Capture on Record
• Fixed a bug causing Record Mode menus to not update
• Fixed an issue that prevented users from scrolling to the bottom of the camera menu
• Fixed Iris string clipping when receiving T-Stop Iris values
• Fixed an issue causing presets to fail to save to the camera

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Features Added:

• Added support for RED firmware version 1.7.5
  • If there is a mis-match between the new camera firmware and the RED Touch firmware, at least one of the devices will display an alert to the user prompting an update.

DSMC3™ RED® Touch monitors now ship calibrated to the DCI-P3 Color Space by default. Existing monitors now have a path to switch from a REC 709, to a DCI-P3 calibration by downloading a new LUT from the list below and loading it as a Custom Calibration.

Steps for DCI-P3 Monitor Calibration:

• Enter the Calibration menu (Monitor Settings > Calibration)
• Reference the 8-digit reference number next to Factory Calibration (A07D8007 or 40702052)
• Download the corresponding DCI-P3 calibration LUT
• Install the LUT via Custom Calibration (Monitor Settings > Calibration > Custom Calibration > New Calibration)
• Select DCI-P3 as the Calibration Target
• Load the new Calibration LUT you recently downloaded (Browse for LUT)

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Bugs Fixed:

• Resolved the monitor UI switching to Timelapse mode at inappropriate times
• Resolved an issues with the ND filters on V-RAPTOR XL cameras
• Focus Assist and Peaking may now be toggled off via User Buttons

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Features Added:

• None

Bugs Fixed:

• Resolved Chinese and Japanese font issues
• Improved Guides support for the KOMODO-X^TM
• Updated “Format” Crop Factor support for KOMODO-X^TM

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Features Added:

• Added GIO Scope Interface
  • Add New Tool > Camera > False Color > Gio Scope
• Added support for ISO Display Mode Gain (dB)
  • Menu > System Settings > Status Settings > ISO Display Mode
• Added ability to disable Page System
  • Monitor Settings > Interface > Page OS
• Added edit list functionality

Improvements & Alterations:

• Reduced time spent switching to playback mode.

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Bugs Fixed:

• Resolved Playback control being inoperable when an ND filter was present.

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Bugs Fixed:

• The Shutter edit menu will no longer occasionally default to an incorrect value.
• Pressing and holding on a function button no longer crashes the RED® Touch monitor.

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Bugs Fixed:

• Fixed a bug encountered when changing the filter cartridge with the ISO/ND slider open
• The Timelapse Interval setting may now be controlled via the slider
• The User Presets popup now allows interacting with all checkbox elements

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Improvements and Alterations:

• Added Pixel Zoom to function button options (cycles through zoom levels)
• Added video mirroring to function button options
  • When a mirror/rotate function button is assigned, the user may now specify what combination of mirroring & rotation that function button should apply
• L&R audio meter channels may now be stacked on top of each other for better comparison
• Color Picker tool may now be used to sample an area rather than a single pixel
  • There are still known limitations with the accuracy of our color picker. It would be best to hold of on marketing this too hard until further color picker improvements are made
• Added subtle UI indicators when additional settings menu contents exist below a page break
• Added more detailed error codes to the update system
• Touch Response Animation can be enabled via the Settings Menu
  • Will provide immediate visual feedback when the touchscreen is interacted with

Features Added:

• Exposure Assist tools, can now be captured in an image capture
  • The setting must be enabled via the tool’s configuration menu
• Peaking tool may be captured in an image capture
  • The setting must be enabled via the tool’s configuration menu
• DSMC3 RED® Touchadded support for ND Filters

Bugs Fixed:

• DSMC3 RED® Touch data levels were not correct when using Log video
• Exposure Assist (False Color) custom maps were not reliably preserved through power cycle
• Data levels were incorrect when the monitor was booted in Max Backlight mode

Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update

Firmware Compatibility:

• This firmware is compatible with the DSMC3 RED® Touch 7.0" LCD
• This firmware is not compatible with other SmallHD or RED® Touch monitors

Improvements and Alterations:

• Updates may now be initiated through-camera
• Clip Info Panel now displays upcoming clip number like in-camera
• Significantly increased UI responsiveness and overall speed
• Frame Accurate time code feature accuracy improvements
• Added Dashboard Page to function button assignments
• Allowed more granular backlight control. From 20% steps to 5% steps
• Added DC & Batt. voltages to info view
• ‘No Signal’ now displays if monitor is not receiving video signal from the camera
• The Pixel Zoom Widget now has an opacity adjustment (Settings > Pixel Zoom > Widget Opacity)

Features Added:

• Pressing any two function buttons simultaneously (rapid press) locks the user interface. To unlock the user interface, simultaneously press any two function buttons again
• Added customizable touchscreen User Buttons (Monitor Settings > Interface > User Buttons)
• Added Horizon Indicator Tool
• Switched from tri-linear to tetrahedral LUT interpolation

Bugs Fixed:

• Fixed a bug that would cause the touchscreen to stop working
• Fixed menu glitching/artifacting when using the RED Camera Menu
• The monitor will no longer have artifacts when combining Crop&Scale with rotation
• Editing a Monitor Tool while in camera playback mode now works properly
• Clip info now matches camera LCD clip info
• Custom shutter values now work properly
• Fixed issues with the Waveform data not being aligned to the legend
• Improved list scrolling & selection behavior
• Fixed UI element status colors
• Frame Guide no longer stays active when the tool is disabled
• Fixed bug with Color Pipe naming
• SD Card will be the default capture location as soon as a card is inserted
• Fixed bug causing profile load to fail if profile > 1MB
• Exiting the Calibration menu no longer leaves Custom Calibration selected unless a new calibration was created. Aborting early will leave the calibration menu in the original state, from before the calibration menu was opened
• Color Picker Active/Inactive state now preserved through power cycle

Known Issues in Release:

• Touchscreen Crop Guides may mis-align with the video by up to 3 pixels at some scale factors (no issue at full resolution)

DSMC3™ RED® Touch 7.0" LCD

DSMC3™ RED® Touch monitors now ship calibrated to the DCI-P3 Color Space by default. Existing monitors now have a path to switch from a REC 709, to a DCI-P3 calibration by downloading a new LUT from the list below and loading it as a Custom Calibration.

Steps for DCI-P3 Monitor Calibration:

1. Enter the Calibration menu (Monitor Settings > Calibration)
2. Reference the 8-digit reference number next to Factory Calibration (A07D8007, 40702052 or ^*600F804E)
3. Download the corresponding DCI-P3 calibration LUT
4. Install the LUT via Custom Calibration (Monitor Settings >Calibration > Custom Calibration > New Calibration)
5. Select DCI-P3 as the Calibration Target
6. Load the new Calibration LUT you recently downloaded (Browse for LUT)